Skip to content
No results
  • Home
  • 3D Printing
  • Maker & Open Hardware

Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

Quark Universe
  • Home
  • 3D Printing
  • Maker & Open Hardware
Quark Universe
PLA versus PETG material selection guide for functional 3D prints, highlighting stiffness, impact, heat and load
  • 3D Printing

PLA vs PETG for Functional 3D Prints: Which Should You Use?

Choosing PLA or PETG starts with the job: rigidity, impact, heat and sustained load. Here is how to read the data and test a useful first part.

  • freeman
  • October 27, 2026
  • 3D Printing

Why Your 600 mm/s 3D Printer Still Takes Hours

A 600 mm/s headline does not tell you how long a finished part will take. Learn how material flow, acceleration and cooling limit real printing speed, with worked examples and a practical comparison checklist.

  • freeman
  • October 24, 2026
Five checks for choosing a Raspberry Pi AI accelerator: task, software, performance, system and evidence.
  • Maker & Open Hardware

Raspberry Pi AI HATs: Five Checks Before You Buy

Choosing an AI accelerator for Raspberry Pi 5? Check model support, software, real performance, power and documentation before buying on TOPS alone.

  • freeman
  • October 19, 2026
Editorial graphic about the Form Studio 1 starting price, with abstract layered geometry and a note to consider the complete workflow.
  • 3D Printing

Formlabs Form Studio 1 Starts at $699. What Does That Price Include?

Formlabs has announced the $699 Form Studio 1. We examine its packages, resin options, safety conditions, and what remains unverified before shipping.

  • freeman
  • October 16, 2026
Conceptual comparison of a layered three-dimensional bracket and a flat panel with cutouts.
  • 3D Printing

3D Printer vs. Laser Cutter: Which Tool Fits Your Project?

Choose between a 3D printer and a laser cutter by looking at part geometry, materials, finishing work, and the workspace your project needs.

  • freeman
  • October 14, 2026
  • 1 Comment
Diagram comparing layered 3D printing with laser cutting a flat panel for an electronics project.
  • 3D Printing

Bambu Lab R1: Why a 3D Printing Company Is Moving Into Laser Cutting

A 3D printer can make the brackets for an electronics enclosure. A…

  • freeman
  • October 12, 2026

Popular Posts

PLA versus PETG material selection guide for functional 3D prints, highlighting stiffness, impact, heat and load

PLA vs PETG for Functional 3D Prints: Which Should You Use?

October 27, 2026

Why Your 600 mm/s 3D Printer Still Takes Hours

October 24, 2026
Five checks for choosing a Raspberry Pi AI accelerator: task, software, performance, system and evidence.

Raspberry Pi AI HATs: Five Checks Before You Buy

October 19, 2026

Copyright © 2026 - Quark Universe